Date | 19th, May 2018 |
---|
Home > Press > Making carbon nanotubes as usable as common plastics: Researchers discover that cresols disperse carbon nanotubes at unprecedentedly high concentrations
The carbon nanotube-based dough can be transformed into arbitrary shapes, such as this freestanding strip.Abstract: Carbon nanotube powders are difficult to process because they aggregate in clumpsTypically researchers must add additives to help nanotubes disperse in solventsResearchers find that adding a simple solvent, cresol, can disperse nanotubes at unprecedentedly high concentrationsAs the concentration of carbon nanotubes increases, the material goes from a dilute dispersion to a thick paste, free-standing gel and eventually a kneadable dough
Evanston, IL | Posted on May 15th, 2018
Northwestern University's Jiaxing Huang is ready to reignite carbon nanotube research. And he's doing so with a common chemical that was once used in household cleaners.
By using an inexpensive, already mass produced, simple solvent called cresol, Huang has discovered a way to make disperse carbon nanotubes at unprecedentedly high concentrations without the need for additives or harsh chemical reactions to modify the nanotubes. In a surprising twist, Huang also found that as the nanotubes' concentrations increase, the material transitions from a dilute dispersion to a thick paste, then a free-standing gel and finally a kneadable dough that can be shaped and molded.
'Because of their exceptional mechanical, thermal and electrical properties, carbon nanotubes have attracted a lot of attention for a number of applications,' said Huang, professor of materials science and engineering in Northwestern's McCormick School of Engineering. 'But after decades of research and development, some of the excitement has faded.'
The reason? Carbon nanotubes are notoriously tricky to process ' especially in large quantities. About 10,000 times thinner than a human hair, the wiry, tube-shaped structures are said to be stronger than steel and conduct heat and electricity far better than copper. But when mass produced ' usually in the form of powders ' the tubes twist and clump together. This complication is a major barrier to the material's widespread applications.
'Aggregated tubes are hard to disperse in solvents,' Huang said. 'And if you cannot get a good dispersion, then you won't be able to make high-quality nanotube thin films that many applications rely on.'
In order to bypass this problem, previous researchers used additives to coat the nanotubes, which chemically altered their surfaces and forced them to separate. Although these methods do work, they leave behind residues or alter the nanotubes' surface structures, which can blunt their desirable properties.
By contrast, Huang's team found that cresol does not deteriorate carbon nanotubes' surface functions. And, after separating the entangled tubes, researchers can simply remove the chemical by washing it off or heating it until it evaporates.
Finding unexpected kneads
After unlocking a new way to make carbon nanotubes in higher and higher concentrations, Huang and his team discovered new forms of the material. As the concentration of carbon nanotubes increases, the material transitions from a dilute dispersion to a spreadable paste to a free-standing gel and finally to a kneadable dough. These various forms can be molded, reshaped or used as conductive ink for 3D printing.
'The dough state of nanotubes is fascinating,' said Kevin Chiou, a graduate student in Huang's laboratory and first author of the paper. 'It can be readily shaped and molded into arbitrary structures just like playdough.'
'Essentially, this solvent system now makes nanotubes behave just like polymers,' Huang said. 'It is really exciting to see cresol-based solvents make once hard-to-process carbon nanotubes as usable as common plastics.'
####
For more information, please click here
Contacts:Amanda Morris847-467-6790
Copyright © Northwestern University
If you have a comment, please Contact us.
Issuers of news releases, not 7th Wave, Inc. or Nanotechnology Now, are solely responsible for the accuracy of the content.
The study was published online on May 14 in the Proceedings of the National Academy of Sciences:
News and information
Scientists unravel 'Hall effect' mystery in search for next generation memory storage devices August 19th, 2022
Researchers design new inks for 3D-printable wearable bioelectronics: Potential uses include printing electronic tattoos for medical tracking applications August 19th, 2022
Visualizing nanoscale structures in real time: Open-source software enables researchers to see materials in 3D while they're still on the electron microscope August 19th, 2022
3D & 4D printing/Additive-manufacturing
Researchers design new inks for 3D-printable wearable bioelectronics: Potential uses include printing electronic tattoos for medical tracking applications August 19th, 2022
Possible Futures
New chip ramps up AI computing efficiency August 19th, 2022
Rice team eyes cells for sophisticated data storage: National Science Foundation backs effort to turn living cells into equivalent of computer RAM August 19th, 2022
Nanotubes/Buckyballs/Fullerenes/Nanorods
Buckyballs on gold are less exotic than graphene July 22nd, 2022
Strain-sensing smart skin ready to deploy: Nanotube-embedded coating detects threats from wear and tear in large structures July 15th, 2022
Boron nitride nanotube fibers get real: Rice lab creates first heat-tolerant, stable fibers from wet-spinning process June 24th, 2022
Nanotubes: a promising solution for advanced rubber cables with 60% less conductive filler June 1st, 2022
Discoveries
Scientists unravel 'Hall effect' mystery in search for next generation memory storage devices August 19th, 2022
Researchers design new inks for 3D-printable wearable bioelectronics: Potential uses include printing electronic tattoos for medical tracking applications August 19th, 2022
Visualizing nanoscale structures in real time: Open-source software enables researchers to see materials in 3D while they're still on the electron microscope August 19th, 2022
Materials/Metamaterials
Strain-sensing smart skin ready to deploy: Nanotube-embedded coating detects threats from wear and tear in large structures July 15th, 2022
New protocol for assessing the safety of nanomaterials July 1st, 2022
Nanotubes: a promising solution for advanced rubber cables with 60% less conductive filler June 1st, 2022
Announcements
Scientists unravel 'Hall effect' mystery in search for next generation memory storage devices August 19th, 2022
Researchers design new inks for 3D-printable wearable bioelectronics: Potential uses include printing electronic tattoos for medical tracking applications August 19th, 2022
Visualizing nanoscale structures in real time: Open-source software enables researchers to see materials in 3D while they're still on the electron microscope August 19th, 2022
Interviews/Book Reviews/Essays/Reports/Podcasts/Journals/White papers/Posters
Scientists unravel 'Hall effect' mystery in search for next generation memory storage devices August 19th, 2022
Researchers design new inks for 3D-printable wearable bioelectronics: Potential uses include printing electronic tattoos for medical tracking applications August 19th, 2022
Visualizing nanoscale structures in real time: Open-source software enables researchers to see materials in 3D while they're still on the electron microscope August 19th, 2022
Printing/Lithography/Inkjet/Inks/Bio-printing/Dyes
On-Chip Photodetection: Two-dimensional material heterojunctions hetero-integration May 13th, 2022